PLC Ipari Ellenőrző Testület FX1N-10MR DC10-28V Programozható Relé Késleltetés a Modul PLC Programozható Logikai Vezérlő

Az áru paraméterei

Condition:

100% new

Model:

FX1N-10MR

Power supply:

10-28VDC

Weight:

ca.92g / 3.2oz

function:

1. Activate the power supply, relay 1 is closed after closing N seconds, then relay 2 is closed after closing N seconds. :

2. Turn on the power, relay 1 turns off after N seconds of closure, then relay 2 turns off after N seconds, then goes into the cycle. :

3. When switched on, relays 1 and 2 are not activated. When a signal is present or a button is activated, relay 1 is deactivated after closing N seconds, then relay 2 is switched off after N secondsand then turned off until the next trigger, repeating the same action. :

By programming signals 1, 2, it is possible to obtain any control of relays 1 and 2. :

4. When signal 1 has a signal, relay 1 is closed and relay 2 is off; :

5When signal 2 has a signal, relay 1 is off and relay 2 is closed. :

6. Only the NPN sensor signal can be connected and the sensor signal can be programmed to perform any relay control. :

7. When signal 1 has a trigger, check relay 1; when signal 2 has a trigger, check relay 2. :

8. Turn on the power, check motor rotation for N seconds,then invert N seconds and scroll. :

9. When signal 1 has a signal, the motor is controlled to rotate forward, when the signal 2 has a signal, the motor is reversed. :

List of packages:

1 * Relay module :